RELATED: 21 DIY Dog Clothes And Coats You Should Make
How to Make a Dog Collar | A Fun Project for Your Dog Dog Neck Collar DIY
Want to give your dog a snazzy collar without the spendy price tag? Making a piece of fabric from scratch is easier than you think!
If you know your way around a sewing machine, you can whip up a collar in under an hour, and customize it with fun fabrics however you’d like. From fun to elegant, to just plain soft and comfy, this tutorial on how to make dog collars are a great way to give your dog big style on a small budget.
The collar has three metal/plastic components, which you can buy individually at a hardware store, or save a ton of money on by buying online at Amazon.com. You’ll need a 1” Side-Release Buckle, 1” Tri-Glide Slider, and a 1” D-Ring. To buy these all together as a set, visit this Amazon link. The fabric of your choice. This is the fun part, so select a fabric that you love! I would recommend standard cotton fabric like mine, or even a rich upholstery fabric (nothing too heavy). Just don’t get anything stretchy like spandex, or anything that will dig into your dog’s neck with sequins, etc. You can purchase a very small amount of the fabric (1 foot or even ¼ of a yard will be plenty). Coordinating thread that matches your fabric.
Other Tools and Items Around the House:
Sewing Machine Scissors Rotary Cutter + Cutting Mat (Optional) Iron + Ironing Board Safety Pin Tape Measure Step 1: Measure the Long Width
Spread out your fabric on a clean tabletop and measure across the long width of the fabric. This collar will fit a medium-size dog—I cut my fabric to 31” in length to make a collar for my 50 pound Australian Shepherd, and that size worked perfectly for him (remember, we are making an adjustable collar).
Because we are using a 1” buckle in this tutorial, suitable for medium to large dogs, I would recommend cutting your fabric between 30” – 34” in length.
Step 2: Cut Out Two Identical Strips
Once you have your fabric panel cut to your desired length, it’s time to cut out two identical strips of fabric from your panel, each 2″ wide.
Use scissors, rotary cutter, or a simple tear (if you are using 100% cotton fabric, you can simply make a small snip at the edge and then tear a perfectly straight line) to get two strips of fabric. In this photo, my strips are 31” long by 2” wide.
Step 3: Sew the Identical Fabrics Together
Place your two identical fabric strips together, with the brightly colored “right sides” pressed together inside the sandwich. We’re going to sew them together, and then right-side-out the tube that is formed.
Since our fabric strips are 2” wide, and our buckles, sliders, and D-rings for the collar are 1” wide, we want to sew the fabric strips together right now in a way that will make the fabric of the collar 1” wide when it is right-sided out and pressed with the iron. Meaning that we should have a ½” seam allowance on either side, with 1” of fabric in between, as you can see in the picture.
If I were to make this collar over again, I would make that middle area just the teeny-tiniest bit bigger than 1”—the reason being, that when everything is right-side-out and pressed, the middle loses a little bit of width, and doesn’t quite fill the entire width of the buckle.
But I’m talking about a really really, teeny-tiny amount (I’m a perfectionist, haha). If you don’t care, don’t worry about it, but if little imperfections like that make you crazy, then just add about ⅛ of an inch to that inner section of fabric (so that it’s 1 ⅛ inch wide).
Step 4: Iron-Press the Fabric
Once you have sewed a line down both sides of your fabric sandwich (leaving the ends open – don’t sew across those!), it’s time to right-side everything out. I’d recommend using a safety pin to do that, by pinning it to one end of the fabric and pushing it through the “tunnel” to the other side.
When you’re done, you’ll end up with a wrinkled, snaking, tube that doesn’t quite resemble anything like a collar yet. That’s where the iron comes in!
With just a few minutes of straightening, tugging, and iron-pressing, you’ll take your round, wrinkly tube from floppy to flat and crisp.
Step 5: Stitch Both Ends of the Collar
Once you’ve ironed everything, let’s address the ends of your fabric collar. Fold the ragged edges inside, and do a simple stitch line across the end with your dog collar sewing machine—remember to backstitch a few times.
Do this on both ends of the collar.
Step 6: Tri-Glide Slider
Phew! Well, the most labor-intensive part is over, and now we have some simple assembly to do. Let’s start with the tri-glide slider.
Feed your fabric collar up through the bottom, over the crossbar, and down through the other side, as pictured in Step 6. Leave about 1.5” of fabric sticking out of the end—that will be the tab that we sew down in the next step.
RELATED: Learn To Make A Paracord Dog Collar | Instructions
Step 7: Sew a Box Stitch
Sew that 1.5” tab down to the collar using a box stitch.
A box stitch is pretty much what it sounds like—it’s a stitch pattern that is a box with an “X” through it. Simple and secure!
Take a look at the photo for Step 7 to see the simple pattern.
Step 8: Feed Through the Side-Release Buckle
Now that you have the tri-glide slider sewn into place, let’s move on to the male end of your collar. Feed the fabric up through the bottom of the side-release buckle (the male side), up over the crossbar, and back down through the back.
Notice the orientation of everything in the photo for Step 8.
Step 9: Hide the Box Stitch
Using that same end that we just fed through the side-release buckle, go all the way back around the outside of the collar until you come to the tri-glide slider again. Feed the end of the fabric up through the bottom, over the crossbar, and back down and through the other side.
Also, notice that you’ve just hidden the box stitch area that we did a few steps ago. That box stitch is now hidden inside the collar, which is lovely!
Step 10: D-Ring into the Fabric’s End
Almost done! Slide the D-ring into the end of the fabric, and then slide the female end of the side-release buckle on, as well.
Step 11: Straight Stitch the Slide-Release Buckle in Place
Don’t worry about where the D-ring is flopping around for now—we’ll take care of it in Step 12, coming up next. Use a simple, straight stitch to secure the female end of the side-release buckle in place, once again remembering to backstitch a few times.
Step 12: Pull D-Ring to Buckle Until Pressed
Now for one more box stitch to finish off the collar! Pull the D-ring up towards the buckle as far as possible, until it is pressing against the seam that you just sewed in Step 11.
Drop your presser foot right next to the D-ring, and position the needle all the way to the right. The photo shows my left needle position before I moved it over to the right, but don’t be thrown for a loop—move your needle as close as you can towards that D-ring for a nice, tight stitch.
After you’ve done the final box stitch, trim everything up, and you’re done! Now you can walk your dog in style with their handmade, eye-catching collar.
Check out these different kinds of dog collars by Wag! Dog Walking:
That’s about it for this DIY dog collar! It does seem a bit complicated with all those stitching but if you have some background in sewing fabric, this project is pretty much done and doable.
Have fun making this dog collar and give your pet a nice makeover!
What do you think of this DIY dog collar project? Share your thoughts with us in the comments section below!
How To Make a Shabby Chic Dog Leash and Treat Wall Hanger | DIY Pet Project Ombre Rope Dog Leash | DIY Pet Projects 15 DIY Pet Projects & Recipes
Editor’s Note: This post was originally published on December 31, 2014, and has been updated for quality and relevancy.
The post DIY Fabric Dog Collar | How To Make A Dog Collar appeared first on DIY Projects Craft Ideas & How To’s for Home Decor with Videos.